南方科技大学知识苑(SUSTech KC): Correlation Between Martensitic Transformation and Strain Burst in Retained Austenite Grains During Nanoindentation Investigation

题名	Correlation Between Martensitic Transformation and Strain Burst in Retained Austenite Grains During Nanoindentation Investigation
作者	He，B. B.; Pan，S.
通讯作者	He，B. B.
发表日期	2021
DOI	10.1007/s12540-020-00913-4
发表期刊	METALS AND MATERIALS INTERNATIONAL 影响因子和分区
ISSN	1598-9623
EISSN	2005-4149
卷号	28页码:573-578
摘要	In general, the martensitic transformation in metastable austenite grain in steels during nanoindentation investigation will induce strain burst, also commonly referred as pop-in. However, it is found that the occurrence of pop-in depends on the position of transformed martensite. Different from the martensite transformed beneath the indenter, the martensite transformed adjacent to the indenter may not necessarily lead to an obvious pop-in. Nevertheless, the formation of martensite adjacent to the indenter can alter the mechanical behavior of the austenite phase. Thus, the present work demonstrates that in addition to the detection of pop-in, an investigation on the change of mechanical behavior of austenite phase is necessary to characterize the martensitic transformation during nanoindentation investigation. Graphic Abstract: [Figure not available: see fulltext.]
关键词	Duplex stainless steel Martensitic transformation Nanoindentation Strain burst
相关链接	[Scopus记录]
收录类别	SCI ; EI
语种	英语
学校署名	第一 ; 通讯
资助项目	Southern University of Science and Technology[33/Y01336122]
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000605552200001
出版者	KOREAN INST METALS MATERIALS
EI入藏号	20214611169915
EI主题词	Austenite ; Martensite ; Nanoindentation
EI分类号	Metallography:531.2 ; Nanotechnology:761
ESI学科分类	MATERIALS SCIENCE
Scopus记录号	2-s2.0-85098781204
来源库	Scopus
引用统计	被引频次[WOS]：13
成果类型	期刊论文
条目标识符	http://sustech.caswiz.com/handle/2SGJ60CL/210877
专题	工学院_机械与能源工程系
作者单位	Department of Mechanical and Energy Engineering,Southern University of Science and Technology,Shenzhen,518055,China
第一作者单位	机械与能源工程系
通讯作者单位	机械与能源工程系
第一作者的第一单位	机械与能源工程系
推荐引用方式 GB/T 7714	He，B. B.,Pan，S.. Correlation Between Martensitic Transformation and Strain Burst in Retained Austenite Grains During Nanoindentation Investigation[J]. METALS AND MATERIALS INTERNATIONAL,2021,28:573-578.
APA	He，B. B.,&Pan，S..(2021).Correlation Between Martensitic Transformation and Strain Burst in Retained Austenite Grains During Nanoindentation Investigation.METALS AND MATERIALS INTERNATIONAL,28,573-578.
MLA	He，B. B.,et al."Correlation Between Martensitic Transformation and Strain Burst in Retained Austenite Grains During Nanoindentation Investigation".METALS AND MATERIALS INTERNATIONAL 28(2021):573-578.