Effect of cutting fluid on milling of additively manufactured inconel 738lc

Ren，Guanhui; Zhou，Cong; Zhang，Bi

2021

0255-5476

1662-9752

MATER SCI FORUM

1027 MSF

117-122

This study focuses on the effect of cutting fluid on sample surface integrity and tool wear in milling additively manufactured Inconel 738LC. Sample surface integrity and tool wear characterization was undertaken using scanning electron microscopy, backscatter electron microscopy, energy dispersive spectroscopy, laser scanning confocal microscopy, ultra-depth of field digital microscope system and digital display hardness tester. Compared with dry milling, wet milling not only provides an entirely different result on surface morphology, but also shows less surface plastic deformation, and smaller surface roughness. In addition, the tool wear mechanisms of wet milling are found to be different compared to dry milling.

Additive manufacturing Cutting fluid Inconel 738LC Milling Surface integrity Tool wear mechanisms

第一 ; 通讯

英语

EI

20212110379919

Additives ; Cutting fluids ; Digital devices ; Energy dispersive spectroscopy ; Manufacture ; Milling (machining) ; Morphology ; Plastic deformation ; Scanning electron microscopy ; Surface morphology ; Surface roughness ; Wear of materials

Heat Treatment Processes:537.1 ; Machine Tool Accessories:603.2 ; Machining Operations:604.2 ; Chemical Agents and Basic Industrial Chemicals:803 ; Physical Properties of Gases, Liquids and Solids:931.2

2-s2.0-85105946888

Scopus

Department of Mechanical and Energy Engineering,Southern University of Science and Technology,Shenzhen,518055,China

Ren，Guanhui,Zhou，Cong,Zhang，Bi. Effect of cutting fluid on milling of additively manufactured inconel 738lc[C],2021:117-122.