Metal Injection Molding of Thin-Walled Titanium Glasses Arms: A Case Study

Ye, Shulong1,2; Mo, Wei1; Lv, Yonghu1; Li, Xia1; Kwok, Chi Tat2,3; Yu, Peng1

2018-05

10.1007/s11837-018-2788-1

JOM   影响因子和分区

1047-4838

1543-1851

Commercially pure titanium (CP Ti) and Ti-6Al-4V arms for a new brand of augmented reality smart glasses, which are over 170 mm in length, with thin wall structures and extremely complex surfaces, have been successfully fabricated via metal injection molding. After sintering, both the metal injection-molded (MIMed) CP Ti and Ti-6Al-4V can reach relative densities of over 95% with an oxygen content similar to 2200 ppm, thus imparting mechanical properties comparable to cast alloys. The ductility of the MIMed CP Ti and Ti-6Al-4V are about 15% and 8%, respectively. This is a good example of applying metal injection molding to mass production of precise Ti alloy parts with complicated shapes.

SCI ; CPCI-S ; EI

英语

第一 ; 通讯

Peacock Plan of Shenzhen Municipality[20130701226B]

Materials Science ; Metallurgy & Metallurgical Engineering ; Mineralogy ; Mining & Mineral Processing

Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering ; Mineralogy ; Mining & Mineral Processing

WOS:000429674800002

SPRINGER

20181004853191

Augmented reality ; Glass ; Metal molding ; Metals ; Sintering ; Thin walled structures ; Titanium alloys ; Titanium metallography

Foundry Practice:534.2 ; Titanium and Alloys:542.3 ; Computer Software, Data Handling and Applications:723 ; Glass:812.3

MATERIALS SCIENCE

Web of Science

1.Southern Univ Sci & Technol, Dept Mat Sci & Engn, Shenzhen 518055, Guangdong, Peoples R China
2.Univ Macau, Inst Appl Phys & Mat Engn, Macau, Peoples R China
3.Univ Macau, Dept Electromech Engn, Macau, Peoples R China

Ye, Shulong,Mo, Wei,Lv, Yonghu,et al. Metal Injection Molding of Thin-Walled Titanium Glasses Arms: A Case Study[J]. JOM,2018,70(5):616-620.

Ye, Shulong,Mo, Wei,Lv, Yonghu,Li, Xia,Kwok, Chi Tat,&Yu, Peng.(2018).Metal Injection Molding of Thin-Walled Titanium Glasses Arms: A Case Study.JOM,70(5),616-620.

Ye, Shulong,et al."Metal Injection Molding of Thin-Walled Titanium Glasses Arms: A Case Study".JOM 70.5(2018):616-620.