Multi-objective shape optimization of a heat exchanger tube fitted with compound inserts

Chamoli, Sunil1,2; Yu, Peng1; Yu, Shimin1

2017-05-05

10.1016/j.applthermaleng.2017.02.047

APPLIED THERMAL ENGINEERING   影响因子和分区

1359-4311

This paper reports a multi-objective optimization of a heat exchanger tube fitted with compound insert geometries to obtain a maximum convective heat transfer rate and minimum pressure loss. A series of experimental runs has been constructed using response surface methodology (RSM) to study the effect of geometrical and flow parameters on heat transfer and friction characteristics along with parameter optimization. The study involves the dimensionless parameters: Reynolds number (Re), pitch ratio (PR), twist ratio (TR), and twisted tape number (N). The characteristic numbers involving heat transfer characteristics (Nusselt number ratio, Nu/Nu(s) and friction characteristics (friction factor ratio, f/f(s)) calculated from experimental data are served as the response variables for RSM. The objective functions for Nu/Nu(s) and f /f(s) are constructed using RSM and utilized in multi-objective genetic algorithm to obtain the Pareto-optimal fronts. The results show that the decrease in the PR, TR and increase in N, Re are measured in the augmentation of both the objective functions. It is concluded that the acquired Pareto optimal configurations provide principal understanding into the design parameters and allow autonomy of selection among the optimal solutions. A thermal enhancement factor is used to study the thermal-hydraulic performance of the Pareto optimal solutions. (C) 2017 Elsevier Ltd. All rights reserved.

Heat exchanger tube Compound inserts Heat transfer enhancement RSM Multi-objective optimization

SCI ; EI

英语

第一 ; 通讯

Thermodynamics ; Energy & Fuels ; Engineering ; Mechanics

Thermodynamics ; Energy & Fuels ; Engineering, Mechanical ; Mechanics

WOS:000397690700072

PERGAMON-ELSEVIER SCIENCE LTD

20170903402701

Friction ; Genetic algorithms ; Heat convection ; Multiobjective optimization ; Optimal systems ; Pareto principle ; Reynolds number ; Shape optimization ; Tribology

Heat Exchange Equipment and Components:616.1 ; Fluid Flow, General:631.1 ; Heat Transfer:641.2 ; Optimization Techniques:921.5 ; Classical Physics; Quantum Theory; Relativity:931 ; Systems Science:961

ENGINEERING

Web of Science

1.Southern Univ Sci & Technol, Dept Mech & Aerosp Engn, Shenzhen 518055, Peoples R China
2.DIT Univ, Dept Mech Engn, Dehra Dun 248009, India

Chamoli, Sunil,Yu, Peng,Yu, Shimin. Multi-objective shape optimization of a heat exchanger tube fitted with compound inserts[J]. APPLIED THERMAL ENGINEERING,2017,117:708-724.

Chamoli, Sunil,Yu, Peng,&Yu, Shimin.(2017).Multi-objective shape optimization of a heat exchanger tube fitted with compound inserts.APPLIED THERMAL ENGINEERING,117,708-724.

Chamoli, Sunil,et al."Multi-objective shape optimization of a heat exchanger tube fitted with compound inserts".APPLIED THERMAL ENGINEERING 117(2017):708-724.