Predictive model of milling force for complex profile milling

Su, Xiang1,2; Wang, Gang2; Yu, Jianchao2; Jiang, Feng3; Li, Jianfeng1; Rong, Yiming2,4

2016-11

10.1007/s00170-016-8589-1

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY   影响因子和分区

0268-3768

1433-3015

Cutting force, temperature, and stress on a cutting tool reflect the working condition of the cutting tool. Among these, the cutting force is relatively easier to be monitored and more reflective of the machining process stability. In this study, a new model of the milling force applied for a complex profile milling cutter has been developed based on the infinitesimal method. A dynamic contact model has been implemented through analyzing the working status of each section on the complex milling cutter. An underlying database is established in the form of response surfaces from simulation. The model of milling force for a complex profile milling cutter has been validated to be accurate by the comparison between the calculated and measured milling forces.

Complex profile milling cutter Milling force Infinitesimal method Dynamic contact model

SCI ; EI

英语

其他

Beijing Natural Science Foundation Project[3152013]

Automation & Control Systems ; Engineering

Automation & Control Systems ; Engineering, Manufacturing

WOS:000387307600037

SPRINGER LONDON LTD

20161102103963

Cutting ; Cutting tools ; End effectors ; Milling cutters ; Rolling resistance

Machine Tools, General:603.1 ; Machine Tool Accessories:603.2 ; Machining Operations:604.2 ; Robotics:731.5 ; Rubber Products:818.5

ENGINEERING

Web of Science

1.Shandong Univ, Minist Educ, Key Lab High Efficiency & Clean Mech Manufacture, Jinan 250001, Peoples R China
2.Tsinghua Univ, Beijing Key Lab Precis Ultraprecis Mfg Equipment, Beijing 100084, Peoples R China
3.Huaqiao Univ, Inst Mfg Engn, Xiamen 361021, Peoples R China
4.South Univ Sci & Technol China, Mech & Energy Engn Dept, Shenzhen 518055, Peoples R China

Su, Xiang,Wang, Gang,Yu, Jianchao,et al. Predictive model of milling force for complex profile milling[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,87(5-8):1653-1662.

Su, Xiang,Wang, Gang,Yu, Jianchao,Jiang, Feng,Li, Jianfeng,&Rong, Yiming.(2016).Predictive model of milling force for complex profile milling.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,87(5-8),1653-1662.

Su, Xiang,et al."Predictive model of milling force for complex profile milling".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 87.5-8(2016):1653-1662.