南方科技大学知识苑(SUSTech KC): Temperature effect on the friction and wear of an Al-60Si alloy

题名	Temperature effect on the friction and wear of an Al-60Si alloy
作者	Rahaman, Mohammad Lutfar 1,2; Zhang, Liangchi3,4,5
通讯作者	Zhang, Liangchi
发表日期	2022-05-01
DOI	10.1007/s00170-022-09381-z
发表期刊	INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 影响因子和分区
ISSN	0268-3768
EISSN	1433-3015
摘要	This paper investigates the effect of environmental temperature on the friction and wear of an Al-60Si (Si >= 50%) alloy. The sliding tests were conducted on a pin-on-disk tribometer. The deformation mechanisms of the alloy under contact sliding were analysed by scanning electron microscopy and energy-dispersive X-ray spectroscopy. It was found that the friction coefficient increased, and the wear rate decreased with the rise of the environmental temperature. The severe subsurface deformation and fracture of silicon particles controlled the friction and wear mechanisms at room temperature. The wear modes were abrasion and delamination. However, at elevated temperatures, a mechanically mixed oxide layer containing materials from the disk formed in the wear tracks and dominated the wear mechanism. The thickness of the mixed layer increased, and wear mode changed from "adhesion" to "adhesion plus fracturing/ploughing of adhered materials" when the environmental temperature rose from 373 to 573 K. The surface oxidation facilitated the removal of the disk material leading to a higher wear resistance of the alloy.
关键词	Al high Si alloy Friction Wear Environmental temperature
相关链接	[来源记录]
收录类别	SCI ; EI
语种	英语
学校署名	通讯
资助项目	Guangdong Specific Discipline Project[2020ZDZX2006] ; Shenzhen Key Laboratory of Cross-scale Manufacturing Mechanics Project[ZDSYS20200810171201007]
WOS研究方向	Automation & Control Systems ; Engineering
WOS类目	Automation & Control Systems ; Engineering, Manufacturing
WOS记录号	WOS:000798397700004
出版者	SPRINGER LONDON LTD
ESI学科分类	ENGINEERING
来源库	Web of Science
引用统计	被引频次[WOS]：0
成果类型	期刊论文
条目标识符	http://sustech.caswiz.com/handle/2SGJ60CL/335166
专题	工学院_力学与航空航天工程系
作者单位	1.Dhaka Univ Engn & Technol, Dept Mech Engn, Gazipur 1707, Bangladesh 2.Griffith Univ, Griffith Sch Engn, Gold Coast Campus, Southport, Qld 4222, Australia 3.Southern Univ Sci & Technol, Shenzhen Key Lab Cross Scale Mfg Mech, Shenzhen 518055, Guangdong, Peoples R China 4.Southern Univ Sci & Technol, SUSTech Inst Mfg Innovat, Shenzhen 518055, Guangdong, Peoples R China 5.Southern Univ Sci & Technol, Dept Mech & Aerosp Engn, Shenzhen 518055, Guangdong, Peoples R China
通讯作者单位	南方科技大学; 力学与航空航天工程系
推荐引用方式 GB/T 7714	Rahaman, Mohammad Lutfar,Zhang, Liangchi. Temperature effect on the friction and wear of an Al-60Si alloy[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022.
APA	Rahaman, Mohammad Lutfar,&Zhang, Liangchi.(2022).Temperature effect on the friction and wear of an Al-60Si alloy.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY.
MLA	Rahaman, Mohammad Lutfar,et al."Temperature effect on the friction and wear of an Al-60Si alloy".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022).