A review on additive manufacturing of ceramic matrix composites

Sun，Jinxing1,2; Ye，Daorong1,2; Zou，Ji3; Chen，Xiaoteng1; Wang，Yue1; Yuan，Jinsi1; Liang，Haowen1; Qu，Hongqiao1; Binner，Jon2; Bai，Jiaming1

2023-03-01

10.1016/j.jmst.2022.06.039

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY   影响因子和分区

1005-0302

1941-1162

Additive manufacturing (AM) of ceramic matrix composites (CMCs) has enabled the production of highly customized, geometrically complex and functionalized parts with significantly improved properties and functionality, compared to single-phase ceramic components. It also opens up a new way to shape damage-tolerant ceramic composites with co-continuous phase reinforcement inspired by natural materials. Nowadays, a large variety of AM techniques has been successfully applied to fabricate CMCs, but variable properties have been obtained so far. This article provides a comprehensive review on the AM of ceramic matrix composites through a systematic evaluation of the capabilities and limitations of each AM technique, with an emphasis on reported results regarding the properties and potentials of AM manufactured ceramic matrix composites.

3D printing Additive manufacturing Bioinspired composites Ceramic matrix composites Mechanical properties

SCI ; EI

英语

第一

National Natural Science Foundation of China[52022072];

Materials Science ; Metallurgy & Metallurgical Engineering

Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering

WOS:000880674000001

JOURNAL MATER SCI TECHNOL

20224212972303

Additives ; Ceramic matrix composites ; Polymer matrix composites

Printing Equipment:745.1.1 ; Chemical Agents and Basic Industrial Chemicals:803 ; Ceramics:812.1 ; Polymeric Materials:815.1

MATERIALS SCIENCE

2-s2.0-85138795521

Scopus

1.Department of Mechanical and Energy Engineering,Southern University of Science and Technology,Shenzhen,518055,China
2.School of Metallurgy and Materials,University of Birmingham,B15 2TT,United Kingdom
3.State Key Laboratory of Advanced Technology for Materials Synthesis and Processing,Wuhan University of Technology,Wuhan,430070,China

Sun，Jinxing,Ye，Daorong,Zou，Ji,et al. A review on additive manufacturing of ceramic matrix composites[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2023,138:1-16.

Sun，Jinxing.,Ye，Daorong.,Zou，Ji.,Chen，Xiaoteng.,Wang，Yue.,...&Bai，Jiaming.(2023).A review on additive manufacturing of ceramic matrix composites.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,138,1-16.

Sun，Jinxing,et al."A review on additive manufacturing of ceramic matrix composites".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 138(2023):1-16.