WR-3.4 Band Waveguide and Bandpass Filters Using Copper Additive Manufacturing

Wen，Xiaozhu1; Yu，Yang2; Shi，Guanghua1; Wang，Zhen1; Cheng，Qingsha S.3; Li，Yun4; Zhang，Anxue1; Guo，Cheng1

2022

10.1109/TMTT.2022.3217772

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES   影响因子和分区

0018-9480

1557-9670

This article presents a waveguide with a pair of E-plane bends and two waveguide bandpass filters (BPFs) which operate in WR-3.4 band (220–330 GHz). These devices are fabricated by a micro metal additive manufacturing (M-MAM) technology on copper in one piece. Both filters are fifth order and operate at a center frequency of 280 GHz with a bandwidth of 8 GHz. Cylindrical resonators are employed for filter design. The standard feed waveguides are designed in bend structures, facilitating the measurements. The M-MAM technology is a layer-by-layer additive manufacturing process constructing the waveguide devices in five layers. Since the layout of the devices has a strong impact on the electrostatic field distributions and hence the electroforming quality, both full-wave electromagnetic (EM) simulations and electrostatic analysis are simultaneously considered in the device design. It eases the subsequent electroforming and polishing processes, effectively improving the performance of the devices. The insertion losses and return losses of the measured filters are lower than 1.65 dB and better than 15 dB. The center frequency shifts are less than 0.3%. The excellent results attribute to the delicate co-design method between EM and electrostatic analyses encountered both in the filter design and in the additive manufacturing process.

Cylindrical resonator electroforming simulation Electromagnetic waveguides layout design Metals micro metal additive manufacturing (M-MAM) Power transmission lines Resists Surface waves Three-dimensional printing Waveguide components waveguide filters

SCI ; EI

英语

其他

National Natural Science Foundation of China["62001367","62071211"] ; National Key Laboratory Foundation["2021-JCJQ-LB-006","6142411552114"]

Engineering

Engineering, Electrical & Electronic

WOS:000881970700001

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC

20224613112359

3D printers ; Bandpass filters ; Copper ; Design ; Electrochemistry ; Electrodes ; Electroforming ; Electrometallurgy ; Electroplating ; Electrostatics ; Resonators ; Waveguide filters

Metallurgy:531.1 ; Electroplating:539.3.1 ; Copper:544.1 ; Electricity: Basic Concepts and Phenomena:701.1 ; Electric Filters:703.2 ; Waveguides:714.3 ; Printing Equipment:745.1.1 ; Electrochemistry:801.4.1

ENGINEERING

2-s2.0-85141571947

Scopus

1.School of Information and Communications Engineering, Shaanxi Key Laboratory of Deep Space Exploration Intelligent Information Technology, Xi’an Jiaotong University, Xi’an, China
2.National Space Science Center, Key Laboratory of Microwave Remote Sensing, Chinese Academy of Sciences, Beijing, China
3.Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen, China
4.National Key Laboratory of Science and Technology on Space Microwave, China Academy of Space Technology, Xi’an, China

Wen，Xiaozhu,Yu，Yang,Shi，Guanghua,et al. WR-3.4 Band Waveguide and Bandpass Filters Using Copper Additive Manufacturing[J]. IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES,2022,PP(99):1-11.

Wen，Xiaozhu.,Yu，Yang.,Shi，Guanghua.,Wang，Zhen.,Cheng，Qingsha S..,...&Guo，Cheng.(2022).WR-3.4 Band Waveguide and Bandpass Filters Using Copper Additive Manufacturing.IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES,PP(99),1-11.

Wen，Xiaozhu,et al."WR-3.4 Band Waveguide and Bandpass Filters Using Copper Additive Manufacturing".IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES PP.99(2022):1-11.