The effect of clay type and solid wettability on bitumen extraction from Canadian oil sands

Li，An1; Li，Rui2; Yan，Ci1; Wang，Han1; Liu，Qingxia1; Masliyah，Jacob H.1; Zeng，Hongbo1; Xu，Zhenghe1,3

2023-04-01

10.1016/j.fuel.2022.126887

FUEL   影响因子和分区

0016-2361

Clays (<2 μm) in oil sands ores have a significant impact on the processability of the ores. The present study aims at understanding the effects of the type and wettability of clays on the performance of bitumen extraction from mined oil sands. The results from batch extraction tests showed a detrimental effect of doping with hydrophilic clays (kaolinite, illite and montmorillonite), with montmorillonite being the worst. The crucial role of clays in bitumen slime-coating was studied through atomic force microscopy and clay deposition tests. For the hydrophilic clays, clay concentration was an essential parameter in determining the bitumen-clay hetero-coagulation process. Strong slime-coating of clay particles on bitumen droplets occurred only above a critical clay concentration. This critical concentration varied with clay type and water chemistry. Compared with earlier studies, kaolinite was found to deposit strongly on bitumen surfaces for the first time in this study. Hydrophilic clays were contaminated by soaking in toluene-diluted-bitumen solutions to investigate the effect of solid hydrophobicity on bitumen extraction. Hydrophobic clays had a less significant depression on bitumen recovery but a more significant deterioration on froth quality than hydrophilic clays. Similar slime-coating was observed for the different clays once contaminated by diluted bitumen. Furthermore, the presence of a large content of clays in bitumen extraction could result in excessive emulsification of bitumen into small droplets, leading to low bitumen recovery. This work provides useful insights into the fundamental interactions of clays and bitumen, with implications for developing a viable solution in dealing with clays in oil sands operations.

Bitumen droplet size Bitumen extraction Clays Slime-coating Wettability

SCI ; EI

英语

其他

WOS:000996974700001

20230413418881

Coatings ; Deterioration ; Emulsification ; Extraction ; Hydrophilicity ; Hydrophobicity ; Kaolinite ; Oil sands ; Sand ; Wetting

Bituminous Materials:411 ; Minerals:482.2 ; Soils and Soil Mechanics:483.1 ; Petroleum Deposits:512.1 ; Chemical Operations:802.3 ; Coating Materials:813.2 ; Physical Properties of Gases, Liquids and Solids:931.2 ; Materials Science:951

ENGINEERING

2-s2.0-85146449453

Scopus

1.Department of Chemical and Materials Engineering,University of Alberta,Edmonton,T6G 1H9,Canada
2.Petroleum Engineering School,Southwest Petroleum University,Chengdu,610500,China
3.Department of Materials Science and Engineering,Southern University of Science and Technology,Shenzhen,518055,China

Li，An,Li，Rui,Yan，Ci,et al. The effect of clay type and solid wettability on bitumen extraction from Canadian oil sands[J]. FUEL,2023,337.

Li，An.,Li，Rui.,Yan，Ci.,Wang，Han.,Liu，Qingxia.,...&Xu，Zhenghe.(2023).The effect of clay type and solid wettability on bitumen extraction from Canadian oil sands.FUEL,337.

Li，An,et al."The effect of clay type and solid wettability on bitumen extraction from Canadian oil sands".FUEL 337(2023).