A Critical Review on Geometric Improvements for Heat Transfer Augmentation of Microchannels

Yu, Hao1,2; Li, Tongling1; Zeng, Xiaoxin1; He, Tianbiao1; Mao, Ning1,3

2022-12-01

10.3390/en15249474

ENERGIES   影响因子和分区

1996-1073

With the application of microdevices in the building engineering, aerospace industry, electronic devices, nuclear energy, and so on, the dissipation of high heat flux has become an urgent problem to be solved. Microchannel heat sinks have become an effective means of thermal management for microdevices and enhancements for equipment due to their higher heat transfer and small scale. However, because of the increasing requirements of microdevices for thermal load and temperature control and energy savings, high efficiency heat exchangers, especially microchannels are receiving more and more attention. To further improve the performance of microchannels, optimizing the channel geometry has become a very important passive technology to effectively enhance the heat transfer of the microchannel heat sink. Therefore, in this paper, the microchannel geometry characteristics of previous studies are reviewed, classified and summarized. The review is mainly focused on microchannel geometry features and structural design to strengthen the effect of heat transfer and pressure drop. In addition, the correlation between boiling heat transfer and geometric characteristics of microchannel flow is also presented, and the future research direction of microchannel geometry design is discussed.

geometry microchannel heat transfer pressure drop structure optimization

SCI

英语

其他

National Natural Science Foundation of China["52276092","21F20056"] ; Shandong Provincial Natural Science Foundation, China[ZR2020ME170]

Energy & Fuels

Energy & Fuels

WOS:000934041200001

MDPI

Web of Science

1.China Univ Petr East China, Coll Pipeline & Civil Engn, Dept Gas Engn, Qingdao 266580, Peoples R China
2.Southern Univ Sci & Technol, Dept Mech & Aerosp Engn, Shenzhen 518055, Peoples R China
3.Univ Tokyo, Inst Ind Sci, Meguro, Tokyo 1538505, Japan

Yu, Hao,Li, Tongling,Zeng, Xiaoxin,et al. A Critical Review on Geometric Improvements for Heat Transfer Augmentation of Microchannels[J]. ENERGIES,2022,15(24).

Yu, Hao,Li, Tongling,Zeng, Xiaoxin,He, Tianbiao,&Mao, Ning.(2022).A Critical Review on Geometric Improvements for Heat Transfer Augmentation of Microchannels.ENERGIES,15(24).

Yu, Hao,et al."A Critical Review on Geometric Improvements for Heat Transfer Augmentation of Microchannels".ENERGIES 15.24(2022).