One-step additive manufacturing of TiCp reinforced Al2O3–ZrO2 eutectic ceramics composites by laser directed energy deposition

Wu，Dongjiang1; Yu，Xuexin1; Zhao，Ziyuan1; Ma，Guangyi1; Zhou，Cong2; Zhang，Bi2; Ren，Guanhui3,4; Niu，Fangyong1

2023-04-15

10.1016/j.ceramint.2022.12.141

CERAMICS INTERNATIONAL   影响因子和分区

0272-8842

1873-3956

With the rapid and adaptable process properties, laser directed energy deposition (LDED) is increasingly becoming popular for the direct additive manufacturing of melt growth eutectic composite ceramics. In this research, LDED is used to fabricate TiCp-reinforced AlO–ZrO eutectic ceramics. The inhibitory mechanism of various ratios (0 wt % - 50 wt %) of TiCp on crack and porosity defects is investigated. In addition, a summary of the influence of TiCp on the microstructure and mechanical properties is provided. The results indicate that TiCp particles are uniformly distributed throughout the matrix, and the eutectic microstructure around TiCp exhibits an irregular eutectic transition as a result of a decrease in solidification rate. The mismatch of thermal expansion coefficient and elastic modulus between TiCp and AlO–ZrO eutectic matrix causes the cracks to be pinned and transgranular, which suppresses the cracks effectively. Meanwhile, doping TiCp particles enhances the molten pool impact and increases the molten pool temperature, which accelerates the gas escape rate, leading to the porosity decreasing from 6.37% to 0.29%. In comparison to AlO–ZrO eutectic ceramics, 50 wt% TiCp content results in the greatest flexural strength and fracture toughness, with increases of 34.18 and 13.42%, respectively. The greatest compressive strength is attained at 30 wt% TiCp doping, which is approximately 83.75% greater than eutectic ceramics.

Additive manufacturing Al2O3–ZrO2 eutectic ceramics Laser directed energy deposition TiCp particles

SCI ; EI

英语

ESI高被引

其他

National Natural Science Foundation of China["51805070","51790172","52175291"] ; Fundamental Research Funds for the Central Universities["DUT22YG210","DUT22LAB117"] ; Shenzhen Science and Technology Innovation Commission[JSGG20210420091802007]

Materials Science

Materials Science, Ceramics

WOS:000961702400001

ELSEVIER SCI LTD

20225113285786

3D printers ; Additives ; Alumina ; Aluminum oxide ; Compressive strength ; Cracks ; Deposition ; Eutectics ; Fracture toughness ; Porosity ; Reinforcement ; Solidification ; Textures ; Thermal expansion ; Zirconia

Metallography:531.2 ; Thermodynamics:641.1 ; Printing Equipment:745.1.1 ; Chemical Operations:802.3 ; Chemical Agents and Basic Industrial Chemicals:803 ; Inorganic Compounds:804.2 ; Physical Properties of Gases, Liquids and Solids:931.2 ; Materials Science:951

MATERIALS SCIENCE

2-s2.0-85144309496

Scopus

1.Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education,Dalian University of Technology,Dalian,Liaoning,116024,China
2.Department of Mechanical and Energy Engineering,Southern University of Science and Technology,Shenzhen,Guangdong,518055,China
3.Research and Development Department,Shenzhen Xinjinquan Precision Technology Co.,Ltd.,Shenzhen,Guangdong,518055,China
4.School of Mechanical Engineering,Shandong University,Jinan,Shandong,250061,China

Wu，Dongjiang,Yu，Xuexin,Zhao，Ziyuan,等. One-step additive manufacturing of TiCp reinforced Al2O3–ZrO2 eutectic ceramics composites by laser directed energy deposition[J]. CERAMICS INTERNATIONAL,2023,49(8):12758-12771.

Wu，Dongjiang.,Yu，Xuexin.,Zhao，Ziyuan.,Ma，Guangyi.,Zhou，Cong.,...&Niu，Fangyong.(2023).One-step additive manufacturing of TiCp reinforced Al2O3–ZrO2 eutectic ceramics composites by laser directed energy deposition.CERAMICS INTERNATIONAL,49(8),12758-12771.

Wu，Dongjiang,et al."One-step additive manufacturing of TiCp reinforced Al2O3–ZrO2 eutectic ceramics composites by laser directed energy deposition".CERAMICS INTERNATIONAL 49.8(2023):12758-12771.