| 题名 | Multimaterial 3D printed self-locking thick-panel origami metamaterials |
| 作者 | |
| 通讯作者 | Lu,Yang; Ge,Qi; Lu,Yang; Ge,Qi |
| 发表日期 | 2023-03-23
|
| DOI | |
| 发表期刊 | |
| EISSN | 2041-1723
|
| 卷号 | 14期号:1 |
| 摘要 | Thick-panel origami has shown great potential in engineering applications. However, the thick-panel origami created by current design methods cannot be readily adopted to structural applications due to the inefficient manufacturing methods. Here, we report a design and manufacturing strategy for creating thick-panel origami structures with excellent foldability and capability of withstanding cyclic loading. We directly print thick-panel origami through a single fused deposition modeling (FDM) multimaterial 3D printer following a wrapping-based fabrication strategy where the rigid panels are wrapped and connected by highly stretchable soft parts. Through stacking two thick-panel origami panels into a predetermined configuration, we develop a 3D self-locking thick-panel origami structure that deforms by following a push-to-pull mode enabling the origami structure to support a load over 11000 times of its own weight and sustain more than 100 cycles of 40% compressive strain. After optimizing geometric parameters through a self-built theoretical model, we demonstrate that the mechanical response of the self-locking thick-panel origami structure is highly programmable, and such multi-layer origami structure can have a substantially improved impact energy absorption for various structural applications. |
| 相关链接 | [Scopus记录] |
| 收录类别 | |
| 语种 | 英语
|
| 重要成果 | NI论文
|
| 学校署名 | 第一
|
| 资助项目 | National Natural Science Foundation of China-Yunnan Joint Fund[11922215]
; City University of Hong Kong[9667226]
|
| WOS研究方向 | Science & Technology - Other Topics
|
| WOS类目 | Multidisciplinary Sciences
|
| WOS记录号 | WOS:001016963000019
|
| 出版者 | |
| Scopus记录号 | 2-s2.0-85150861224
|
| 来源库 | Scopus
|
| 引用统计 |
被引频次[WOS]：62
|
| 成果类型 | 期刊论文 |
| 条目标识符 | http://sustech.caswiz.com/handle/2SGJ60CL/524079 |
| 专题 | 工学院_机械与能源工程系 |
| 作者单位 | 1.Shenzhen Key Laboratory of Soft Mechanics & Smart Manufacturing,Southern University of Science and Technology,Shenzhen,518055,China 2.Department of Mechanical and Energy Engineering,Southern University of Science and Technology,Shenzhen,518055,China 3.Department of Mechanical Engineering,City University of Hong Kong,Kowloon,Hong Kong 4.Nano-Manufacturing Laboratory (NML),Shenzhen Research Institute of City University of Hong Kong,Shenzhen,China 5.Department of Mechanical Engineering,The University of Hong Kong,Pokfulam,Hong Kong 6.Shenzhen Key Laboratory of Soft Mechanics & Smart Manufacturing,Southern University of Science and Technology,Shenzhen,518055,China 7.Department of Mechanical and Energy Engineering,Southern University of Science and Technology,Shenzhen,518055,China 8.Department of Mechanical Engineering,City University of Hong Kong,Kowloon,Hong Kong 9.Nano-Manufacturing Laboratory (NML),Shenzhen Research Institute of City University of Hong Kong,Shenzhen,China 10.Department of Mechanical Engineering,The University of Hong Kong,Pokfulam,Hong Kong 11.Shenzhen Key Laboratory of Soft Mechanics & Smart Manufacturing,Southern University of Science and Technology,Shenzhen,518055,China 12.Department of Mechanical and Energy Engineering,Southern University of Science and Technology,Shenzhen,518055,China 13.Department of Mechanical Engineering,City University of Hong Kong,Kowloon,Hong Kong 14.Nano-Manufacturing Laboratory (NML),Shenzhen Research Institute of City University of Hong Kong,Shenzhen,China 15.Department of Mechanical Engineering,The University of Hong Kong,Pokfulam,Hong Kong 16.Shenzhen Key Laboratory of Soft Mechanics & Smart Manufacturing,Southern University of Science and Technology,Shenzhen,518055,China 17.Department of Mechanical and Energy Engineering,Southern University of Science and Technology,Shenzhen,518055,China 18.Department of Mechanical Engineering,City University of Hong Kong,Kowloon,Hong Kong 19.Nano-Manufacturing Laboratory (NML),Shenzhen Research Institute of City University of Hong Kong,Shenzhen,China 20.Department of Mechanical Engineering,The University of Hong Kong,Pokfulam,Hong Kong |
| 第一作者单位 | 南方科技大学; 机械与能源工程系 |
| 第一作者的第一单位 | 南方科技大学 |
| 推荐引用方式 GB/T 7714 |
Ye，Haitao,Liu，Qingjiang,Cheng，Jianxiang,et al. Multimaterial 3D printed self-locking thick-panel origami metamaterials[J]. Nature Communications,2023,14(1).
|
| APA |
Ye，Haitao.,Liu，Qingjiang.,Cheng，Jianxiang.,Li，Honggeng.,Jian，Bingcong.,...&Ge,Qi.(2023).Multimaterial 3D printed self-locking thick-panel origami metamaterials.Nature Communications,14(1).
|
| MLA |
Ye，Haitao,et al."Multimaterial 3D printed self-locking thick-panel origami metamaterials".Nature Communications 14.1(2023).
|
| 条目包含的文件 | ||||||
| 文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | 操作 | |
| Multimaterial 3D pri（3471KB） | -- | -- | 开放获取 | -- | 浏览 | |
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
;
修改评论