A non-contact inspection method of tile debonding using tuned acoustic wave and laser doppler vibrometer

Zhao，Yu1,2; Chen，Yuan2; Ye，Lin2

2023-11-10

10.1016/j.jsv.2023.117875

Journal of Sound and Vibration   影响因子和分区

0022-460X

1095-8568

The debonding of tiles from walls is currently a critical issue in modern cities. This study develops a non-contact acoustic approach integrating an effective numerical model for accurate inspection of tile debonding from a wall, with the aid of a directional sound source and a laser doppler vibrometer (LDV). Typical engineering tile debonding cases are characterised and analysed using the non-contact inspection method. Numerical modelling based on full-field modelling is performed to simulate and predict the inspection process. In both experiments and simulations, the acoustic wave with a sweeping frequency band is generated by the sound source and directed to the tiles. Activated vibration signals are captured at multiple points on the tile surface and then processed, and an out-of-surface velocity map of the tile is plotted to identify the debonding area, where good agreements between the numerical and experimental results can be seen. The results show that different shapes of the debonding areas under the tiles can be well detected, proving the effectiveness of the method.

Acoustic wave Laser doppler vibrometer Non-contact inspection Tile debonding inspection

SCI ; EI

英语

通讯

Acoustics ; Engineering ; Mechanics

Acoustics ; Engineering, Mechanical ; Mechanics

WOS:001056667400001

ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD

20232614306814

Acoustic generators ; Acoustic waves ; Classifiers ; Debonding ; Doppler effect ; Laser Doppler velocimeters ; Numerical models

Laser Applications:744.9 ; Acoustic Waves:751.1 ; Acoustic Generators:752.4 ; Chemical Plants and Equipment:802.1 ; Mathematics:921 ; Mechanical Instruments:943.1

ENGINEERING

2-s2.0-85162914829

Scopus

1.Centre for Advanced Materials Technology (CAMT),School of Aerospace,Mechanical and Mechatronic Engineering,The University of Sydney,2006,Australia
2.School of System Design and Intelligent Manufacturing (SDIM),Southern University of Science and Technology,Shenzhen,China

Zhao，Yu,Chen，Yuan,Ye，Lin. A non-contact inspection method of tile debonding using tuned acoustic wave and laser doppler vibrometer[J]. Journal of Sound and Vibration,2023,564.

Zhao，Yu,Chen，Yuan,&Ye，Lin.(2023).A non-contact inspection method of tile debonding using tuned acoustic wave and laser doppler vibrometer.Journal of Sound and Vibration,564.

Zhao，Yu,et al."A non-contact inspection method of tile debonding using tuned acoustic wave and laser doppler vibrometer".Journal of Sound and Vibration 564(2023).