Parametric studies and compressive performance of GH4169/K465 Kagome lattice structure prepared by selective laser melting

Yang，Binghua1,2; Wang，Jinshuai1,2; Zhao，Hongjian3; Ma，Quanjin4; Qing，Yongquan1,2; Zhan，Yu3; Shang，Shuo1,2; Liu，Changsheng1,2

2023-12-01

10.1016/j.istruc.2023.105652

Structures   影响因子和分区

2352-0124

This paper is proposed a sufficient strategy to enhance the Kagome lattice structure by introducing sphere connections at the joints of the rods. Three types of lattice structures, namely single-cell Kagome, sandwich monocyte, and multi-layer sandwich GH4169/K465, were fabricated through the selective laser melting method. Experimental results demonstrated that the load peak value of the lattice structure increased gradually with variations in rod diameter and angle. When the rod diameter is 2 mm and the angle is 50°, the comprehensive performance is relatively excellent. Both the single-cell Kagome and sandwich monocyte structures exhibited a secondary load peak curve for the load versus displacement curve.The primary failure mode of the spherical connections Kagome structure is member fracture. For sandwich cell structures, when the rod diameter is 1.1 mm, the elastic modulus, yield strength and energy absorption of SRK are 412 MPa, 17.02 MPa and 8.05 MJ/mm3, respectively. When the rod diameter is increased to 1.7 mm, the properties of SRK are 561 MPa, 84.32 MPa and 35.49 MJ/mm, respectively. The properties of SRK gradually increase with the increase of rod diameter. the elastic modulus, yield strength, and energy absorption of strut-reinforced Kagome with varying rod diameters surpass those of both the Kagome and spherical connections Kagome structures. The failure mode in strut-reinforced Kagome structures is primarily due to rod buckling. In the compressive stress-strain curve of the multi-layer sandwich structure,when the deformation amount is 0.2, SRK has a higher compressive strength than Kagome and SCK structure, which can reach about 350 MPa, while Kagome and SCK are lower than 200 MPa. demonstrated a gradual increasing trend in stress with increasing strain. In addition, the mechanical properties of the Kagome lattice structure are enhanced due to partial structural failure, with fracture occurring in certain members.

Compression response GH4169/K465 superalloy Kagome lattice structure Selective laser melting

EI ; SCI

英语

其他

20234915155681

Biomechanics ; Compression testing ; Compressive strength ; Compressive stress ; Ductile fracture ; Elastic moduli ; Energy absorption ; Melting ; Reinforcement ; Spheres ; Stress-strain curves ; Structural properties ; Struts ; Superalloys ; Yield stress

Structural Design:408 ; Structural Members and Shapes:408.2 ; Biomechanics, Bionics and Biomimetics:461.3 ; Metallurgy and Metallography:531 ; Reproduction, Copying:745.2 ; Chemical Operations:802.3 ; Materials Science:951

2-s2.0-85178147752

Scopus

1.School of Materials Science and Engineering,Northeastern University,Shenyang,110819,China
2.Key Laboratory for Anisotropy and Texture of Materials,Ministry of Education,Northeastern University,Shenyang,110819,China
3.College of Sciences,Northeastern University,Shenyang,110819,China
4.School of System Design and Intelligent Manufacturing,Southern University of Science and Technology,Shenzhen,518055,China

Yang，Binghua,Wang，Jinshuai,Zhao，Hongjian,et al. Parametric studies and compressive performance of GH4169/K465 Kagome lattice structure prepared by selective laser melting[J]. Structures,2023,58.

Yang，Binghua.,Wang，Jinshuai.,Zhao，Hongjian.,Ma，Quanjin.,Qing，Yongquan.,...&Liu，Changsheng.(2023).Parametric studies and compressive performance of GH4169/K465 Kagome lattice structure prepared by selective laser melting.Structures,58.

Yang，Binghua,et al."Parametric studies and compressive performance of GH4169/K465 Kagome lattice structure prepared by selective laser melting".Structures 58(2023).