Role of shielding gas and rolling treatment on mechanical properties of CP-Ti sheet fabricated by selective laser melting

Chen，Pinghu1; Qiu，Changjun1; Wu，Wenxing1; Li，Ruiqing2; Zhang，Yun3; Yan，Ming4; Zhou，Yinghao4,5

2024-03-01

10.1016/j.jmrt.2024.01.199

Journal of Materials Research and Technology   影响因子和分区

2238-7854

Commercially pure titanium (CP–Ti) took advantages of low stiffness, high corrosion resistance and bio-compatibility, implying an ideal structural material in aerospace, military and medical industries. However, its insufficient mechanical properties have always been the long-standing obstacle for the industrial applications. In this work, we have achieved a superior strong and ductile CP-Ti via active atmosphere-assisted selective laser melting (SLM) and subsequent rolling treatment. By incorporating the active N atmosphere during SLM, mechanical properties of CP-Ti were substantially improved, microhardness of the lyaers with 10 at.% and 100 at.% was 63 % and 174.3 % higher than that of CP-Ti with 182.3 HV, the compressive strength of 10 sample was 27.1 % higher than that of 10 L sample when the strain was 52.2 %, and ultimate tensile strength of 10 sample reached 928 MPa with an elongation of 25.6 %, and ultimate tensile strength and elongation of 10 L sample were enhanced simultaneously by 58.3 % and 13.6 % relative to CP-Ti sample. These were attributed to the interstitial strengthening induced by N atoms. After rolling treatment, the mechanical properties of N-doping layers could enhance furtherly. Macroscale cracking along the rolling direction never occur in the 10 L sample during the repeatedly rolling treatment, which could depend to high tolerability of sandwich layers for high-density dislocations. Meanwhile, rolling treatment played an important role for refining grain to enhance the strength further.

Mechanical properties Microstructural evolution Sandwich material Selective laser melting Strengthening mechanism

SCI ; EI

英语

通讯

2-s2.0-85183207699

Scopus

1.College of Mechanical Engineering,Key Laboratory of Hunan Province of Equipment Safety Service Technology Under Extreme Environment,University of South China,Hengyang,421001,China
2.Light Alloys Research Institute,State Key Laboratory of Precision Manufacturing for Extreme Service Performance,Central South University,Changsha,410083,China
3.School of Mechanical Engineering,Hunan University of Science and Technology,Xiangtan,411201,China
4.Department of Materials Science and Engineering,Southern University of Science and Technology,Shenzhen,518055,China
5.Department of Mechanical Engineering,City University of Hong Kong,Hong Kong,China

Chen，Pinghu,Qiu，Changjun,Wu，Wenxing,et al. Role of shielding gas and rolling treatment on mechanical properties of CP-Ti sheet fabricated by selective laser melting[J]. Journal of Materials Research and Technology,2024,29:1066-1075.

Chen，Pinghu.,Qiu，Changjun.,Wu，Wenxing.,Li，Ruiqing.,Zhang，Yun.,...&Zhou，Yinghao.(2024).Role of shielding gas and rolling treatment on mechanical properties of CP-Ti sheet fabricated by selective laser melting.Journal of Materials Research and Technology,29,1066-1075.

Chen，Pinghu,et al."Role of shielding gas and rolling treatment on mechanical properties of CP-Ti sheet fabricated by selective laser melting".Journal of Materials Research and Technology 29(2024):1066-1075.