Small-strain folding of semi-rigid elastomer derives high-performance 3D-printable soft origami actuators

Liu，Sicong1; Chen，Fang1; Duanmu，Dehao2,3; Wang，Yaxi4; Liu，Jianhui1; Yang，Wenjian1; Zhu，Yuming1; Wu，Yige1; Yi，Juan1; Dai，Jian S.1; Wang，Zheng1

2024-06-01

10.1016/j.cej.2024.151462

Chemical Engineering Journal   影响因子和分区

1385-8947

Elastomers with hyperelastic deformation bring prosperity to soft robotics, especially in constituting fluidic actuators, largely due to the merit of large deformation and airtightness. However, the large (typically 0.5–1.5 strain) in-plane stretching of such materials concurrent to motion generation inevitably causes energy loss, hinders force output and accuracy. Particularly, the high nonlinearity of the low-durometer (typically 10A to 30A Shore) hyperelastic elastomers makes the modeling and control of actuators a well-known challenge. In this work, we proposed an alternative approach of using semi-rigid elastomer of significantly larger durometer (70 A–100 A) to create the typical fluidic soft actuator with axial translation, by utilizing small-strain folding to generate motion. Deformation constraints and property programming are combined into a single-piece body, enabling easy fabrication by Selective Laser Sintering 3D-printing and post-treatment for origami patterned structure. Systematic analyses on the principles, modeling and design are presented. The long lifespan (over 1 million cycles), superior output linearity, high energy efficiency (more than 60% increase), and drastically improved force output (more than 98% increase) were validated experimentally, showing high potentials in enabling high-performance soft actuators that are easy to design, fabricate and drive, strong to use, and accurate to control, towards even wider applications.

Origami Semi-rigid elastomer SLS printing Small-strain folding Soft actuator

SCI ; EI

英语

第一 ; 通讯

ENGINEERING

2-s2.0-85191326065

Scopus

1.Department of Mechanical and Energy Engineering,Southern University of Science and Technology,Shenzhen,518000,China
2.Orthopedic Center,The University of Hong Kong-Shenzhen Hospital,Shenzhen,China
3.Department of Orthopaedics and Traumatology,The University of Hong Kong,Hong Kong
4.Department of Mechanical Engineering,University College London,London,Gower Street,United Kingdom

Liu，Sicong,Chen，Fang,Duanmu，Dehao,et al. Small-strain folding of semi-rigid elastomer derives high-performance 3D-printable soft origami actuators[J]. Chemical Engineering Journal,2024,489.

Liu，Sicong.,Chen，Fang.,Duanmu，Dehao.,Wang，Yaxi.,Liu，Jianhui.,...&Wang，Zheng.(2024).Small-strain folding of semi-rigid elastomer derives high-performance 3D-printable soft origami actuators.Chemical Engineering Journal,489.

Liu，Sicong,et al."Small-strain folding of semi-rigid elastomer derives high-performance 3D-printable soft origami actuators".Chemical Engineering Journal 489(2024).