Effect of lubricants during the rolling process on the mixed mode fracture behavior of the as-rolled material

Chavoshbashi, Jafar1; Keshtiban, Peyman Mashhadi1; Oskui, Abuzar Es'haghi2

2024-09-20

10.1016/j.engfracmech.2024.110356

ENGINEERING FRACTURE MECHANICS   影响因子和分区

0013-7944

1873-7315

Friction is one of the major factors in energy consumption and metal depreciation during various mechanical processes. Lubrication is often used during the process of forming metals to cope with friction and its consequences. Mineral lubricants are employed in the rolling process to decrease the rolling force and enhance the quality of the sheets. This research aims to compare the performance of mineral lubricants such as crude oil, gas oil, and CM405A to enhance the production efficiency of the aluminum forming process, especially in the rolling process. The ring compression test was utilized to evaluate the influence of lubrication on the friction coefficient which was extracted through calibration curves. Then, the effect of friction coefficient was experimentally examined during the forming process through rolling. Al 1050 was rolled by the mentioned lubricants. The pre-cracked rolled samples were then tested by fracture test at different loading angles of 0 (pure mode-I), 45 (mixed-mode of I and II), and 90 (pure mode-II). JR curves were extracted using elastic-plastic fracture theory based on material characteristics. The fracture tests indicated maximum resistance to crack growth occurred in the sample prepared with CM405A lubricant. In contrast, the lowest crack growth resistance was recorded in the case where crude oil was employed as a lubricant. In the end, the SEM images of the fractured surfaces were explored for a deeper understanding of the fracture behavior. Although a combination of brittle and ductile fracture mechanisms can be observed on the fractured surfaces, cleavage was the dominant phenomenon and fracture mechanisms.

Cold rolling Lubrication Friction Mixed-mode fracture Ring compression test Finite element method

SCI ; EI

英语

其他

Mechanics

Mechanics

WOS:001292382800001

PERGAMON-ELSEVIER SCIENCE LTD

ENGINEERING

Web of Science

1.Urmia Univ Technol, Fac Mech Engn, Orumiyeh, Iran
2.Southern Univ Sci & Technol, Dept Mech & Aerosp Engn, Shenzhen 518055, Guangdong, Peoples R China

Chavoshbashi, Jafar,Keshtiban, Peyman Mashhadi,Oskui, Abuzar Es'haghi. Effect of lubricants during the rolling process on the mixed mode fracture behavior of the as-rolled material[J]. ENGINEERING FRACTURE MECHANICS,2024,308.

Chavoshbashi, Jafar,Keshtiban, Peyman Mashhadi,&Oskui, Abuzar Es'haghi.(2024).Effect of lubricants during the rolling process on the mixed mode fracture behavior of the as-rolled material.ENGINEERING FRACTURE MECHANICS,308.

Chavoshbashi, Jafar,et al."Effect of lubricants during the rolling process on the mixed mode fracture behavior of the as-rolled material".ENGINEERING FRACTURE MECHANICS 308(2024).