| 题名 | Loading rate effect on the shear behavior of the carbon fiber/epoxy interface |
| 作者 | |
| 通讯作者 | Tang, Jianbo; Ren, Fuzeng |
| 发表日期 | 2024-10-20
|
| DOI | |
| 发表期刊 | |
| ISSN | 0266-3538
|
| 卷号 | 257 |
| 摘要 | Carbon fiber (CF)/epoxy (EP) composites are widely used in structural components. Quasistatic and dynamic shear experiments were designed and conducted to investigate the effect of the loading rate on the shear behavior of the CF/EP interface. Using numerical simulation, the accuracy of the new shear testing methods to test the shear behavior of interface under both quasistatic and dynamic loading conditions was verified. The shear failure stress increases with increasing loading rate, and the failure mode of the CF/EP interface changes from fiber-matrix debonding to almost entirely brittle fracture of the matrix and fiber-matrix debonding. The proposed shear test methods are promising for testing the shear behavior of interface between two kinds of materials or phases, and the shift in the failure mode is a consequence of the effect of the loading rate on the shear behavior of the CF/EP interface. © 2024 Elsevier Ltd |
| 收录类别 | |
| 语种 | 英语
|
| 学校署名 | 第一
; 通讯
|
| 资助项目 | This work was financially supported by the National Natural Science Foundation of China (Grant Nos. 12302095 and 52122102). The authors would like to thank the experimental assistance of Prof. Zhenyu Jiang from South China University of Technology on the quasistatic shear test experiment.
|
| 出版者 | |
| EI入藏号 | 20243316884286
|
| EI主题词 | Brittle fracture
; Debonding
; Dynamic loads
; Numerical methods
; Shear flow
; Stress analysis
|
| EI分类号 | Structural Design, General:408.1
; Fluid Flow, General:631.1
; Chemical Products Generally:804
; Numerical Methods:921.6
; Materials Science:951
|
| ESI学科分类 | MATERIALS SCIENCE
|
| 来源库 | EV Compendex
|
| 引用统计 |
被引频次[WOS]：3
|
| 成果类型 | 期刊论文 |
| 条目标识符 | http://sustech.caswiz.com/handle/2SGJ60CL/807034 |
| 专题 | 工学院_材料科学与工程系 南方科技大学 |
| 作者单位 | 1.Department of Materials Science and Engineering, Southern University of Science and Technology, Guangdong, Shenzhen; 518055, China 2.Department of Mechanical and Aerospace Engineering, The Hong Kong University of Science and Technology, China 3.School of Aeronautics, Northwestern Polytechnical University, Shaanxi, Xi'an; 710072, China 4.Advanced Manufacturing Center, Ningbo Institute of Technology, Beihang University, Zhejiang, Ningbo; 315100, China 5.Guangdong Provincial Key Laboratory of Electronic Functional Materials and Devices, Huizhou University, Guangdong, Huizhou; 516007, China 6.Hopkins Extreme Materials Institute, Johns Hopkins University, 3400 N. Charles St., Baltimore; MD; 21218, United States |
| 第一作者单位 | 材料科学与工程系 |
| 通讯作者单位 | 材料科学与工程系 |
| 第一作者的第一单位 | 材料科学与工程系 |
| 推荐引用方式 GB/T 7714 |
Yan, Kai,Cao, Xunqiandi,Xie, Ximing,et al. Loading rate effect on the shear behavior of the carbon fiber/epoxy interface[J]. Composites Science and Technology,2024,257.
|
| APA |
Yan, Kai.,Cao, Xunqiandi.,Xie, Ximing.,Mei, Haijuan.,Tang, Jianbo.,...&Ren, Fuzeng.(2024).Loading rate effect on the shear behavior of the carbon fiber/epoxy interface.Composites Science and Technology,257.
|
| MLA |
Yan, Kai,et al."Loading rate effect on the shear behavior of the carbon fiber/epoxy interface".Composites Science and Technology 257(2024).
|
| 条目包含的文件 | 条目无相关文件。 | |||||
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
;
修改评论